Epoxy & Garage Flooring (L05)
Epoxy and garage floor coatings turn a dusty slab into a durable, easy-clean surface – but in Utah, concrete moisture and freeze-thaw make surface prep and product choice the difference between a floor that lasts and one that peels in a year.
This BidScope guides you through coating systems: epoxy (durable, chemical-resistant, many colors, longer cure), polyaspartic and polyurea (fast-cure, UV-stable, ready in a day, excellent for cold garages), flake or chip broadcast systems (decorative, hides imperfections, adds slip resistance), and metallic epoxy (high-end marbled look). Solid color, full flake, and clear-topcoat build options are all covered.
Learn surface preparation – the single biggest predictor of adhesion: mechanical diamond grinding or shot blasting to a proper concrete surface profile (far more reliable than acid etching), crack and spall repair, joint treatment, and full degreasing of oil stains.
Understand moisture testing before any coating goes down: calcium chloride or relative-humidity probe testing to catch vapor drive from Utah’s high water tables and slab-on-grade construction, which is the number-one cause of coating failure and delamination.
Master the application sequence: primer coat, base color or pigmented build coat, broadcast flake to refusal (then scrape and recoat), and a clear polyaspartic or epoxy topcoat for abrasion and UV resistance – with correct recoat windows and cure times.
Navigate Utah-specific challenges: cold garages that slow epoxy cure (polyaspartic performs better in low temps), road-salt and de-icer exposure tracked in over winter, hot-tire pickup that lifts poorly bonded coatings, and large slab temperature swings between seasons.
Calculate typical costs: DIY kit $150-400, professional epoxy $3-7 per square foot, full flake or polyaspartic system $5-12 per square foot, metallic epoxy $8-15 per square foot.
This BidScope ensures your garage or shop floor is properly prepped, moisture-tested, and coated with the right system for Utah’s climate.
What’s Included:
- Coating system types (epoxy, polyaspartic/polyurea, flake broadcast, metallic)
- Solid color vs full flake vs metallic finish selection
- Surface preparation (diamond grinding or shot blast to proper profile)
- Crack, spall, and control-joint repair
- Oil and grease stain degreasing and remediation
- Concrete moisture and vapor testing (calcium chloride / RH probe)
- Primer, base coat, flake broadcast, and clear topcoat sequence
- Recoat windows and cure-time requirements
- Slip-resistance additives and flake texture
- Polyaspartic fast-cure option for cold Utah garages
- Hot-tire pickup and de-icer/road-salt resistance
- Utah challenges (slab moisture, freeze-thaw, temperature swings)
- Warranty terms and expected coating lifespan
- Cost factors ($150-400 DIY kit, $3-7/sf epoxy, $5-12/sf flake/polyaspartic, $8-15/sf metallic)
